# P\&F Bullish Breakouts

## Bullish Breakouts in P\&F Charts: An Introduction <a href="#introduction" id="introduction"></a>

There are five bullish breakout P\&F patterns. The most basic P\&F buy signal is a Double Top Breakout, which occurs when an X-Column breaks above the high of the prior X-Column. From this basic pattern, the bullish breakout patterns become more complex and wider. The wider the pattern, the better established the resistance level and the more important the breakout. This article will look at the five key breakout patterns in detail and show measuring techniques for Price Objectives.

## Double Top Breakout <a href="#double_top_breakout" id="double_top_breakout"></a>

In the P\&F world, Double Top Breakouts are bullish patterns that are confirmed with a resistance break. With bar charts, on the other hand, Double Top Breakouts are bearish patterns that are confirmed with a support break. These patterns are not contradictory. They are simply different patterns with similar names.

As noted above, the most fundamental P\&F buy signal is when an X-Column breaks above the high of the prior X-Column. These two columns are separated by an O-Column. X-Columns denote rising prices, while O-Columns signify falling prices. The first rising X-Column establishes direction. The middle O-Column represents a bounce that establishes support. The third X-Column triggers the higher high. The ability to break above the prior high shows strength associated with an uptrend.

As the most common signal in the P\&F universe, Double Top Breakouts are also the most prone to whipsaw and failure. These breakouts should be viewed in the context of the bigger picture. It is important to employ other aspects of technical analysis when using signals as common as Double Top Breakouts.&#x20;

The chart below shows Diamond Offshore (DO) with several double-top breakouts over the last two years.

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2FUSzu2SnVtJknndCrWgkd%2Fpnfbubo-1-do-dtbo.png?alt=media&#x26;token=a576de72-4a1d-4756-a761-730376763090" alt="P&#x26;F chart from StockCharts.com showing a double top breakout"><figcaption><p>P&#x26;F chart with double top breakouts.</p></figcaption></figure>

## Triple Top Breakout <a href="#triple_top_breakout" id="triple_top_breakout"></a>

The Triple Top Breakout takes the Double Top Breakout one step further by adding a resistance column. Two consecutive X-Columns define resistance with two equal reaction highs. The third X-Column breaks above the prior two X-Columns to forge the Triple Top Breakout. Classic Triple Top Breakouts are five columns wide: three X-Columns and two O-Columns.

These patterns can mark reversal breakouts or continuation breakouts. Distinguishing between reversal and continuation depends on the prior move. A Triple Top Breakout that forms as a base after a decline would be deemed a reversal pattern, while a Triple Top Breakout that forms as a consolidation after an advance would be viewed as a continuation pattern.

The chart below shows Computer Sciences (CSC) with a reversal Triple Top Breakout at the end of 2008 followed by two continuation Triple Top Breakouts. While it's sometimes difficult to distinguish between reversal and continuation patterns, the Triple Top Breakout is easy to identify.

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2FAoovndU72xpQHzh3OF3Y%2Fpnfbubo-2-csc-ttbo.png?alt=media&#x26;token=48a79f0c-5352-4761-a150-b4c58334abfd" alt="P&#x26;F chart from StockCharts.com showing a triple top breakout"><figcaption><p>A Triple Top Breakout in a P&#x26;F chart.</p></figcaption></figure>

## Spread Triple Top Breakout <a href="#spread_triple_top_breakout" id="spread_triple_top_breakout"></a>

As its name implies, the Spread Triple Top Breakout is an expanded version of the Triple Top Breakout. A Spread Triple Top Breakout contains at least two extra columns, which means it is at least seven columns wide. An extra O-Column and an extra X-Column form highs below the actual breakout or resistance level. These columns, in effect, add space or width to the Triple Top Breakout. As with a normal Triple Top Breakout, a Spread Triple Top Breakout is confirmed with a break above the highs of the two X-columns. Ideally, a Spread Triple Top Breakout forms as a Triple Top Breakout with two extra columns. In reality, this pattern can form with more than two extra columns.

The chart below shows Monsanto with two Spread Triple Top Breakouts. The first one (2009) is suspect because of the distance between the first two X-Columns and the breakout X-Column. There is a clear downtrend between these columns. The second Spread Triple Top Breakout is a continuation pattern because it formed after a long X-column. The pattern is seven columns wide, which makes it the ideal length for a Spread Triple Top Breakout.

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2FBPmYP1j7O4Kvn5YBkMTr%2Fpnfbubo-3-mon-sttbo.png?alt=media&#x26;token=7a6e1794-a988-4e99-9b98-809702eee6e3" alt="P&#x26;F chart from StockCharts.com with two spread triple top breakouts"><figcaption><p>P&#x26;F chart with two Spread Triple Top Breakouts.</p></figcaption></figure>

## Ascending Triple Top Breakout <a href="#ascending_triple_top_breakout" id="ascending_triple_top_breakout"></a>

An Ascending Triple Top Breakout is back-to-back Double Top Breakouts. These breakouts form three X-Columns that ascend with each breakout. Because there are three X-Columns and two O-Columns, the pattern is just as wide as a classic Triple Top Breakout. The ability to forge back-to-back higher highs shows underlying strength indicative of an uptrend. As with the other patterns, this Ascending Triple Top Breakout can be a continuation or reversal pattern.

The Rockwell Collins (COL) chart below shows an Ascending Triple Top breakout at the beginning of 2010. The red lines mark back-to-back Double Top Breakouts. Also, the stock established support with two equal O-Columns during the pattern formation. The combination of solid support and higher highs reinforced the pattern's strength. A failed Spread Triple Top Breakout is shown on the far left.

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2FEgcRBoEuuGyQ0mQXyKfF%2Fpnfbubo-4-col-attbo.png?alt=media&#x26;token=64017886-ef6a-4fed-b97d-a03e913d6f13" alt="A P&#x26;F chart from StockCharts.com showing an ascending triple top breakout"><figcaption><p>A P&#x26;F chart with an Ascending Triple Top Breakout.</p></figcaption></figure>

## Quadruple Top Breakout <a href="#quadruple_top_breakout" id="quadruple_top_breakout"></a>

The Quadruple Top Breakout is just like the Triple Top Breakout, only with an extra X-Column to mark resistance and an extra O-Column to widen the pattern. Three consecutive X-Columns define resistance with three equal highs. The fourth X-Column breaks above the prior three X-Columns to forge the Quadruple Top Breakout. All told, Quadruple Top Breakouts are seven columns wide with four X-Columns and three O-Columns. These patterns can mark reversal breakouts or continuation breakouts.

The chart below shows Corning (GLW) with a reversal Quadruple Top Breakout in February 2009. This reversal pattern also resembles an inverse [head-and-shoulders pattern](../../chart-patterns/head-and-shoulders-bottom). The second Quadruple Top Breakout is a bullish continuation pattern. Whether continuation or reversal, resistance levels are clear with a Quadruple Top Breakout, and the breakout point is definitive.

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2FsfGJ9qSjOeXdPEgWOHtV%2Fpnfbubo-5-glw-qtbo.png?alt=media&#x26;token=85422f45-4b2d-46ce-af8b-c53dd1116019" alt="P&#x26;F chart from StockCharts.com showing a quadruple top breakout"><figcaption><p>A P&#x26;F chart with a Quadruple Top Breakout.</p></figcaption></figure>

## Measuring Techniques <a href="#measuring_techniques" id="measuring_techniques"></a>

First and foremost, be careful with price objectives. They are just rough guidelines. Other aspects of technical analysis are good to use to confirm objectives and continuously monitor the state of the trend/breakout.

The horizontal count method can be applied to Triple Top Breakouts, Ascending Triple Top Breakouts, Spread Triple Top Breakouts, and Quadruple Top Breakouts. Simply measure the width of the pattern, multiply it by the box size, and then by the reversal amount. Add this total to the pattern low for a Price Objective. The wider the pattern, the bigger the expected move. Triple Top Breakouts are five columns wide (3 X-Columns and 2 O-Columns), Quadruple Top Breakouts are seven columns wide, and Spread Triple Top Breakouts are seven columns minimum.

The vertical count method can be applied to Double Top Breakouts. After the breakout, chartists must wait for a 3-box reversal to fix the height of the breakout column. The breakout column is subject to change until there is a reversal. This reversal is considered a pullback as long as it does not extend too deep. Count the number of filled boxes in the breakout column, multiply by the box size and then by the reversal amount. Add this product the pattern low for an upside Price Objective.

The chart below shows three different patterns and price objectives. The first is a Double Top Breakout. The height of the breakout column is seven boxes, but these boxes have different sizes (50 cents below 20 and $1 above 20). So you should subtract the high from the low of the breakout column to measure the height (23 - 18.5 = 4.5). Multiply this height by the reversal amount (3) and add the total to the low of the pattern (lowest O-Column) for the price objective.&#x20;

<figure><img src="https://436553459-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FERtrZrZOhufFzk6ZQO4B%2Fuploads%2F8hc9u9vbQQ5CKLGYDfGB%2Fpnfbubo-6-intu-qtbo.png?alt=media&#x26;token=ec428073-304f-4abc-ae32-df6bfb2c4887" alt="P&#x26;F chart from StockCharts.com identifying price objectives for double top breakouts, quadruple top breakouts, and spread triple top breakout"><figcaption><p>A P&#x26;F chart with three patterns and price objectives.</p></figcaption></figure>

The Triple Top Breakout and Quadruple Top Breakout use the horizontal count method. First, the width of the pattern is multiplied by the box size and reversal amount. Second, this total is added to the low of the pattern (lowest O-Column).

Establishing a Price Objective only covers the reward part of the risk-reward equation. Chartists should also study the chart to assess risk. A move below support or the pattern low would clearly negate a breakout. The box just below the pattern low often marks the worst-case level for a pattern failure. Similarly, a Double Bottom Breakdown or a contradictory P\&F pattern would argue for a reassessment. There are sometimes indications of potential failure before price hits the worst-case level. Chartists should also employ other technical analysis techniques to measure risk and monitor the unfolding trend. See our ChartSchool articles for more details on Horizontal Counts, Vertical Counts, and Timeframes for P\&F charts.

## The Bottom Line <a href="#conclusion" id="conclusion"></a>

The most basic P\&F buy signal comes from a Double Top Breakout. The classic patterns widen from here to form consolidations with well-defined resistance levels. Reversal patterns form a base after an extended decline, while continuation patterns act as a rest after an extended advance. A little congestion, a clear resistance level, and a definitive breakout point make these patterns relatively easy to spot.
